Dragon Slay Arcade Fightstick Review

OVERALL VERDICT
The Dragon Slay Arcade Fightstick is a worthy Sanwa fightstick from a relatively unknown brand. If you can get past the fiddly setup then this is a great alternative to the more pricey fighsticks on the market.
PROS
+ Attractive design
+ Good size and weight
+ Sanwa parts
+ Easy to mod
CONS
- Unknown brand
- Fiddly setup

Check on Amazon

Like the Mayflash F500 and F300, the Dragon Slay Arcade Fightstick is a mid-tier universal fightstick that can be played on all major platforms.

Dragon Slay is a UK-based gaming accessories company and is relatively unknown in the space of fightsticks.

The Dragon Slay Arcade Fightstick is their first major fightstick, and It boasts genuine Sanwa parts, the ability to customize the stick easily, and the universal feature. Price-wise, it competes directly with the Mayflash F500 Elite.

The specs seem impressive on paper, but how does the fightstick fair? Let’s find out in my review of the Dragon Slay Arcade Stick.

Unboxing and setting up

The Dragon Slay is neatly packaged and well-protected to prevent unwanted knocks during shipping.

Apart from the fightstick and the standard manuals, you also get several other contents. These include:

  • 2 faceplate prints
  • Micro USB Cable
  • Sticker pack
  • Hex screwdriver

Quite a lot of additional accessories, I have to say. Apart from the Micro USB cable, these aren’t necessary, but it’s nice that they’re included.

This universal fightstick can connect to several platforms, including PC/Android, PS4, Xbox One, and Switch.

The setup is fairly simple if you follow the instructions and is similar to the Mayflash line of fightsticks. On a PC(Windows 64 Bit), for example, I plugged in the stick via the built-in USB cable, and it automatically installed the required drivers and played the post in XINPUT mode.

On PS4, I plugged the stick into the console and then plugged in a PS4 controller via the supplied micro USB micro-cable to the back of the stick.

Ensure to follow the instructions carefully, as the PS4 controller has to be off before you connect, and you have to press the ‘switch’ button to sync up properly. If you follow the instruction in the letter, you should have no problems.

You could also use Mayflash magicboots to get rid of the fiddly setup and plug in and play without connecting to another controller.

The design and feel of the fightstick

At first glance, the design is impressive. At certain angles, It looks similar to the Madcatz TE2 Fightstick, which was a beautiful design in its own right.

At about 16 inches in width, it’s a decent size but not overly so and is about right for this kind of stick. In addition, it weighs about 3.5kg which is a little bit hefty, but at the same time, it feels strong and durable.

The artwork that comes with the stick is cool. You also have the option of adding more artwork with additional faceplates that come with the stick (more on that in the next section).

Modding

As I mentioned, the fightstick comes with 2 additional faceplates, which are nice, but ideally, you’ll want to put them in your artwork, which is rather easy to do.

Using the included hex screwdriver, you have to remove 6 screws to remove the top panel and replace the artwork paper as needed.

Dragon Slay has even gone to the trouble of supplying a design template to use for your custom artwork. You can download it here from the website.

Replacing the buttons is also fairly easy. Again, using the hex screwdriver, remove the screws from the button, and you’ll get access to the inside of the stick. You can swap the buttons and the ball top from here if needed.

Somewhat Disappointing, removing the joystick plate is more difficult because the PCB connectors are glued on. I know some people might not like this, but I don’t have an issue as I’m happy with the Sanwa Denshi joystick.

As I’ve already mentioned, I would also get a Mayflash Magicboots adaptor so that you don’t have to mess around with connecting to a controller first. You can get these from Amazon here.

What does it feel like to play?

Dragon Slay Universal FIghtstick Buttons

Firstly, because the stick is sloped downwards, holding and playing for longer sessions is comfortable.

In addition, I like the size and weight of this stick. It feels quite sturdy in my lap, where I prefer to play. One complaint I have, however, is that the non-slip legs on the bottom of the stick are sufficient to stop it from slipping, which it has on a few occasions.

It would have been better if there was a larger anti-slip surface on the bottom.

The Sanwa-Denshi buttons are actual official Japanese Sanwa buttons. I was a little afraid that they would be a knock-off considering I’ve never heard of this brand, but they are quite good. The feel of the buttons is almost identical to some of the more expensive Sanwa stick out there.

The joystick is rather responsive, too, which is good.

One thing I don’t like – which I guess is the same issue with Mayflash F300 and F500 – is the fiddly setup. It can become cumbersome to constantly connect to another controller and then have all these wires out, which becomes a mess.

In addition, I’ve had some issues where the controller will disconnect mid-game. Fortunately, this has only happened a couple of times in the 30+ hours I’ve used the stick, so it’s not an issue. Still, I feel this is due to the setup of the stick rather than the stick itself.

The Good

  • Attractive design
  • Good size and weight
  • Universal fightstick
  • Sanwa Denshi parts
  • Comfortable to hold
  • Easy to mod
  • Easy to change the artwork
  • Large storage space for cable
  • Lots of additional accessories included

The Bad

  • Unknown brand
  • Fiddly setup
  • Difficult to change the joystick

Overall Verdict

The Dragon Slay Arcade Fightstick is a worthy Sanwa fightstick from a relatively unknown brand. If you can get past the fiddly setup, this is a great alternative to the more pricey fight sticks.

Dragon Slay Arcade Fightstick

8.5

Design

8.3/10

Performance

8.4/10

Modding

8.8/10

Value for money

8.5/10

Illustration of a smiling man with headphones next to an arcade machine, conveying a casual and playful vibe.
Chris "Iron Fist" Thompson

Chris stumbled upon the world of fight sticks after being mesmerized by the precision and technique of professional players in live streams. He soon picked up his first fight stick and quickly rose through the ranks of competitive gaming. With his unyielding determination, Chris has managed to achieve success in both local and national tournaments. Today, he's all about sharing his experience and passion with fellow fight stick enthusiasts.